• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Bussole di taglio cilindriche / slug stop / lunghe / configurabili

Bussole di taglio cilindriche / slug stop / lunghe / configurabili

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

MISUMI

MISUMI

  • PRESS-FIT
  • SKD11

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. Avanti >>
Codice componente
SRS-SDR8-[30-40/0.1]-P[1-4/0.01]-W[1-4/0.01]-R[0.15-2.19/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR8-[30-40/0.1]-P[1-4/0.01]-WC[4.01-4.2/0.01]-R[0.15-2.19/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR8-[30-40/0.1]-PC[4.01-4.2/0.01]-W[1-4/0.01]-R[0.15-2.19/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR8-[30-40/0.1]-PC[4.01-4.2/0.01]-WC[4.01-4.2/0.01]-R[0.15-2.19/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR8-LC[20-40/0.1]-P[1-4/0.01]-W[1-4/0.01]-R[0.15-2.19/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR8-LC[20-40/0.1]-P[1-4/0.01]-WC[4.01-4.2/0.01]-R[0.15-2.19/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR8-LC[20-40/0.1]-PC[4.01-4.2/0.01]-W[1-4/0.01]-R[0.15-2.19/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR8-LC[20-40/0.1]-PC[4.01-4.2/0.01]-WC[4.01-4.2/0.01]-R[0.15-2.19/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR10-[30-40/0.1]-P[1.2-6/0.01]-W[1.2-6/0.01]-R[0.15-3.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR10-[30-40/0.1]-P[1.2-6/0.01]-WC[1-1.19/0.01]-R[0.15-3.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR10-[30-40/0.1]-P[1.2-6/0.01]-WC[6.01-6.2/0.01]-R[0.15-3.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR10-[30-40/0.1]-PC[1-1.19/0.01]-W[1.2-6/0.01]-R[0.15-3.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR10-[30-40/0.1]-PC[1-1.19/0.01]-WC[1-1.19/0.01]-R[0.15-3.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR10-[30-40/0.1]-PC[1-1.19/0.01]-WC[6.01-6.2/0.01]-R[0.15-3.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR10-[30-40/0.1]-PC[6.01-6.2/0.01]-W[1.2-6/0.01]-R[0.15-3.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR10-[30-40/0.1]-PC[6.01-6.2/0.01]-WC[1-1.19/0.01]-R[0.15-3.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR10-[30-40/0.1]-PC[6.01-6.2/0.01]-WC[6.01-6.2/0.01]-R[0.15-3.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR10-LC[20-40/0.1]-P[1.2-6/0.01]-W[1.2-6/0.01]-R[0.15-3.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR10-LC[20-40/0.1]-P[1.2-6/0.01]-WC[1-1.19/0.01]-R[0.15-3.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR10-LC[20-40/0.1]-P[1.2-6/0.01]-WC[6.01-6.2/0.01]-R[0.15-3.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR10-LC[20-40/0.1]-PC[1-1.19/0.01]-W[1.2-6/0.01]-R[0.15-3.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR10-LC[20-40/0.1]-PC[1-1.19/0.01]-WC[1-1.19/0.01]-R[0.15-3.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR10-LC[20-40/0.1]-PC[1-1.19/0.01]-WC[6.01-6.2/0.01]-R[0.15-3.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR10-LC[20-40/0.1]-PC[6.01-6.2/0.01]-W[1.2-6/0.01]-R[0.15-3.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR10-LC[20-40/0.1]-PC[6.01-6.2/0.01]-WC[1-1.19/0.01]-R[0.15-3.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR10-LC[20-40/0.1]-PC[6.01-6.2/0.01]-WC[6.01-6.2/0.01]-R[0.15-3.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR13-[30-40/0.1]-P[1.5-8/0.01]-W[1.5-8/0.01]-R[0.15-4.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR13-[30-40/0.1]-P[1.5-8/0.01]-WC[1-1.49/0.01]-R[0.15-4.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR13-[30-40/0.1]-P[1.5-8/0.01]-WC[8.01-8.2/0.01]-R[0.15-4.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR13-[30-40/0.1]-PC[1-1.49/0.01]-W[1.5-8/0.01]-R[0.15-4.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR13-[30-40/0.1]-PC[1-1.49/0.01]-WC[1-1.49/0.01]-R[0.15-4.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR13-[30-40/0.1]-PC[1-1.49/0.01]-WC[8.01-8.2/0.01]-R[0.15-4.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR13-[30-40/0.1]-PC[8.01-8.2/0.01]-W[1.5-8/0.01]-R[0.15-4.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR13-[30-40/0.1]-PC[8.01-8.2/0.01]-WC[1-1.49/0.01]-R[0.15-4.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR13-[30-40/0.1]-PC[8.01-8.2/0.01]-WC[8.01-8.2/0.01]-R[0.15-4.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR13-LC[20-40/0.1]-P[1.5-8/0.01]-W[1.5-8/0.01]-R[0.15-4.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR13-LC[20-40/0.1]-P[1.5-8/0.01]-WC[1-1.49/0.01]-R[0.15-4.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR13-LC[20-40/0.1]-P[1.5-8/0.01]-WC[8.01-8.2/0.01]-R[0.15-4.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR13-LC[20-40/0.1]-PC[1-1.49/0.01]-W[1.5-8/0.01]-R[0.15-4.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR13-LC[20-40/0.1]-PC[1-1.49/0.01]-WC[1-1.49/0.01]-R[0.15-4.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR13-LC[20-40/0.1]-PC[1-1.49/0.01]-WC[8.01-8.2/0.01]-R[0.15-4.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR13-LC[20-40/0.1]-PC[8.01-8.2/0.01]-W[1.5-8/0.01]-R[0.15-4.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR13-LC[20-40/0.1]-PC[8.01-8.2/0.01]-WC[1-1.49/0.01]-R[0.15-4.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR13-LC[20-40/0.1]-PC[8.01-8.2/0.01]-WC[8.01-8.2/0.01]-R[0.15-4.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR16-[30-40/0.1]-P[2-10/0.01]-W[2-10/0.01]-R[0.15-5.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR16-[30-40/0.1]-P[2-10/0.01]-WC[1-1.99/0.01]-R[0.15-5.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR16-[30-40/0.1]-P[2-10/0.01]-WC[10.01-10.2/0.01]-R[0.15-5.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR16-[30-40/0.1]-PC[1-1.99/0.01]-W[2-10/0.01]-R[0.15-5.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR16-[30-40/0.1]-PC[1-1.99/0.01]-WC[1-1.99/0.01]-R[0.15-5.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR16-[30-40/0.1]-PC[1-1.99/0.01]-WC[10.01-10.2/0.01]-R[0.15-5.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR16-[30-40/0.1]-PC[10.01-10.2/0.01]-W[2-10/0.01]-R[0.15-5.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR16-[30-40/0.1]-PC[10.01-10.2/0.01]-WC[1-1.99/0.01]-R[0.15-5.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR16-[30-40/0.1]-PC[10.01-10.2/0.01]-WC[10.01-10.2/0.01]-R[0.15-5.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR16-LC[20-40/0.1]-P[2-10/0.01]-W[2-10/0.01]-R[0.15-5.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR16-LC[20-40/0.1]-P[2-10/0.01]-WC[1-1.99/0.01]-R[0.15-5.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR16-LC[20-40/0.1]-P[2-10/0.01]-WC[10.01-10.2/0.01]-R[0.15-5.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR16-LC[20-40/0.1]-PC[1-1.99/0.01]-W[2-10/0.01]-R[0.15-5.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR16-LC[20-40/0.1]-PC[1-1.99/0.01]-WC[1-1.99/0.01]-R[0.15-5.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR16-LC[20-40/0.1]-PC[1-1.99/0.01]-WC[10.01-10.2/0.01]-R[0.15-5.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
SRS-SDR16-LC[20-40/0.1]-PC[10.01-10.2/0.01]-W[2-10/0.01]-R[0.15-5.09/0.01]-MT[0.15-8/0.01]-C[0.01-10/0.005]
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSTip shape L dimension classification D (Shank diameter)
(mm) 		C (Clearance)
(mm) 		L (L dimension)
(mm) 		LC (Full length alteration)
(mm) 		MT(Workpiece material thickness)
(mm) 		P (Tip dimension)
(mm) 		PC (Tip dimension alteration)
(mm) 		R (Tip corner R)
(mm) 		W (Tip dimension)
(mm) 		WC (Tip dimension alteration)
(mm)

-

1 Preventivo 10RL40.0 max.80.01 ～ 1030 ～ 40-0.15 ～ 81 ～ 4-0.15 ～ 2.191 ～ 4-

-

1 Preventivo 10RL40.0 max.80.01 ～ 1030 ～ 40-0.15 ～ 81 ～ 4-0.15 ～ 2.19-4.01 ～ 4.2

-

1 Preventivo 10RL40.0 max.80.01 ～ 1030 ～ 40-0.15 ～ 8-4.01 ～ 4.20.15 ～ 2.191 ～ 4-

-

1 Preventivo 10RL40.0 max.80.01 ～ 1030 ～ 40-0.15 ～ 8-4.01 ～ 4.20.15 ～ 2.19-4.01 ～ 4.2

-

1 Preventivo 10RL40.0 max.80.01 ～ 10-20 ～ 400.15 ～ 81 ～ 4-0.15 ～ 2.191 ～ 4-

-

1 Preventivo 10RL40.0 max.80.01 ～ 10-20 ～ 400.15 ～ 81 ～ 4-0.15 ～ 2.19-4.01 ～ 4.2

-

1 Preventivo 10RL40.0 max.80.01 ～ 10-20 ～ 400.15 ～ 8-4.01 ～ 4.20.15 ～ 2.191 ～ 4-

-

1 Preventivo 10RL40.0 max.80.01 ～ 10-20 ～ 400.15 ～ 8-4.01 ～ 4.20.15 ～ 2.19-4.01 ～ 4.2

-

1 Preventivo 10RL40.0 max.100.01 ～ 1030 ～ 40-0.15 ～ 81.2 ～ 6-0.15 ～ 3.091.2 ～ 6-

-

1 Preventivo 10RL40.0 max.100.01 ～ 1030 ～ 40-0.15 ～ 81.2 ～ 6-0.15 ～ 3.09-1 ～ 1.19

-

1 Preventivo 10RL40.0 max.100.01 ～ 1030 ～ 40-0.15 ～ 81.2 ～ 6-0.15 ～ 3.09-6.01 ～ 6.2

-

1 Preventivo 10RL40.0 max.100.01 ～ 1030 ～ 40-0.15 ～ 8-1 ～ 1.190.15 ～ 3.091.2 ～ 6-

-

1 Preventivo 10RL40.0 max.100.01 ～ 1030 ～ 40-0.15 ～ 8-1 ～ 1.190.15 ～ 3.09-1 ～ 1.19

-

1 Preventivo 10RL40.0 max.100.01 ～ 1030 ～ 40-0.15 ～ 8-1 ～ 1.190.15 ～ 3.09-6.01 ～ 6.2

-

1 Preventivo 10RL40.0 max.100.01 ～ 1030 ～ 40-0.15 ～ 8-6.01 ～ 6.20.15 ～ 3.091.2 ～ 6-

-

1 Preventivo 10RL40.0 max.100.01 ～ 1030 ～ 40-0.15 ～ 8-6.01 ～ 6.20.15 ～ 3.09-1 ～ 1.19

-

1 Preventivo 10RL40.0 max.100.01 ～ 1030 ～ 40-0.15 ～ 8-6.01 ～ 6.20.15 ～ 3.09-6.01 ～ 6.2

-

1 Preventivo 10RL40.0 max.100.01 ～ 10-20 ～ 400.15 ～ 81.2 ～ 6-0.15 ～ 3.091.2 ～ 6-

-

1 Preventivo 10RL40.0 max.100.01 ～ 10-20 ～ 400.15 ～ 81.2 ～ 6-0.15 ～ 3.09-1 ～ 1.19

-

1 Preventivo 10RL40.0 max.100.01 ～ 10-20 ～ 400.15 ～ 81.2 ～ 6-0.15 ～ 3.09-6.01 ～ 6.2

-

1 Preventivo 10RL40.0 max.100.01 ～ 10-20 ～ 400.15 ～ 8-1 ～ 1.190.15 ～ 3.091.2 ～ 6-

-

1 Preventivo 10RL40.0 max.100.01 ～ 10-20 ～ 400.15 ～ 8-1 ～ 1.190.15 ～ 3.09-1 ～ 1.19

-

1 Preventivo 10RL40.0 max.100.01 ～ 10-20 ～ 400.15 ～ 8-1 ～ 1.190.15 ～ 3.09-6.01 ～ 6.2

-

1 Preventivo 10RL40.0 max.100.01 ～ 10-20 ～ 400.15 ～ 8-6.01 ～ 6.20.15 ～ 3.091.2 ～ 6-

-

1 Preventivo 10RL40.0 max.100.01 ～ 10-20 ～ 400.15 ～ 8-6.01 ～ 6.20.15 ～ 3.09-1 ～ 1.19

-

1 Preventivo 10RL40.0 max.100.01 ～ 10-20 ～ 400.15 ～ 8-6.01 ～ 6.20.15 ～ 3.09-6.01 ～ 6.2

-

1 Preventivo 10RL40.0 max.130.01 ～ 1030 ～ 40-0.15 ～ 81.5 ～ 8-0.15 ～ 4.091.5 ～ 8-

-

1 Preventivo 10RL40.0 max.130.01 ～ 1030 ～ 40-0.15 ～ 81.5 ～ 8-0.15 ～ 4.09-1 ～ 1.49

-

1 Preventivo 10RL40.0 max.130.01 ～ 1030 ～ 40-0.15 ～ 81.5 ～ 8-0.15 ～ 4.09-8.01 ～ 8.2

-

1 Preventivo 10RL40.0 max.130.01 ～ 1030 ～ 40-0.15 ～ 8-1 ～ 1.490.15 ～ 4.091.5 ～ 8-

-

1 Preventivo 10RL40.0 max.130.01 ～ 1030 ～ 40-0.15 ～ 8-1 ～ 1.490.15 ～ 4.09-1 ～ 1.49

-

1 Preventivo 10RL40.0 max.130.01 ～ 1030 ～ 40-0.15 ～ 8-1 ～ 1.490.15 ～ 4.09-8.01 ～ 8.2

-

1 Preventivo 10RL40.0 max.130.01 ～ 1030 ～ 40-0.15 ～ 8-8.01 ～ 8.20.15 ～ 4.091.5 ～ 8-

-

1 Preventivo 10RL40.0 max.130.01 ～ 1030 ～ 40-0.15 ～ 8-8.01 ～ 8.20.15 ～ 4.09-1 ～ 1.49

-

1 Preventivo 10RL40.0 max.130.01 ～ 1030 ～ 40-0.15 ～ 8-8.01 ～ 8.20.15 ～ 4.09-8.01 ～ 8.2

-

1 Preventivo 10RL40.0 max.130.01 ～ 10-20 ～ 400.15 ～ 81.5 ～ 8-0.15 ～ 4.091.5 ～ 8-

-

1 Preventivo 10RL40.0 max.130.01 ～ 10-20 ～ 400.15 ～ 81.5 ～ 8-0.15 ～ 4.09-1 ～ 1.49

-

1 Preventivo 10RL40.0 max.130.01 ～ 10-20 ～ 400.15 ～ 81.5 ～ 8-0.15 ～ 4.09-8.01 ～ 8.2

-

1 Preventivo 10RL40.0 max.130.01 ～ 10-20 ～ 400.15 ～ 8-1 ～ 1.490.15 ～ 4.091.5 ～ 8-

-

1 Preventivo 10RL40.0 max.130.01 ～ 10-20 ～ 400.15 ～ 8-1 ～ 1.490.15 ～ 4.09-1 ～ 1.49

-

1 Preventivo 10RL40.0 max.130.01 ～ 10-20 ～ 400.15 ～ 8-1 ～ 1.490.15 ～ 4.09-8.01 ～ 8.2

-

1 Preventivo 10RL40.0 max.130.01 ～ 10-20 ～ 400.15 ～ 8-8.01 ～ 8.20.15 ～ 4.091.5 ～ 8-

-

1 Preventivo 10RL40.0 max.130.01 ～ 10-20 ～ 400.15 ～ 8-8.01 ～ 8.20.15 ～ 4.09-1 ～ 1.49

-

1 Preventivo 10RL40.0 max.130.01 ～ 10-20 ～ 400.15 ～ 8-8.01 ～ 8.20.15 ～ 4.09-8.01 ～ 8.2

-

1 Preventivo 10RL40.0 max.160.01 ～ 1030 ～ 40-0.15 ～ 82 ～ 10-0.15 ～ 5.092 ～ 10-

-

1 Preventivo 10RL40.0 max.160.01 ～ 1030 ～ 40-0.15 ～ 82 ～ 10-0.15 ～ 5.09-1 ～ 1.99

-

1 Preventivo 10RL40.0 max.160.01 ～ 1030 ～ 40-0.15 ～ 82 ～ 10-0.15 ～ 5.09-10.01 ～ 10.2

-

1 Preventivo 10RL40.0 max.160.01 ～ 1030 ～ 40-0.15 ～ 8-1 ～ 1.990.15 ～ 5.092 ～ 10-

-

1 Preventivo 10RL40.0 max.160.01 ～ 1030 ～ 40-0.15 ～ 8-1 ～ 1.990.15 ～ 5.09-1 ～ 1.99

-

1 Preventivo 10RL40.0 max.160.01 ～ 1030 ～ 40-0.15 ～ 8-1 ～ 1.990.15 ～ 5.09-10.01 ～ 10.2

-

1 Preventivo 10RL40.0 max.160.01 ～ 1030 ～ 40-0.15 ～ 8-10.01 ～ 10.20.15 ～ 5.092 ～ 10-

-

1 Preventivo 10RL40.0 max.160.01 ～ 1030 ～ 40-0.15 ～ 8-10.01 ～ 10.20.15 ～ 5.09-1 ～ 1.99

-

1 Preventivo 10RL40.0 max.160.01 ～ 1030 ～ 40-0.15 ～ 8-10.01 ～ 10.20.15 ～ 5.09-10.01 ～ 10.2

-

1 Preventivo 10RL40.0 max.160.01 ～ 10-20 ～ 400.15 ～ 82 ～ 10-0.15 ～ 5.092 ～ 10-

-

1 Preventivo 10RL40.0 max.160.01 ～ 10-20 ～ 400.15 ～ 82 ～ 10-0.15 ～ 5.09-1 ～ 1.99

-

1 Preventivo 10RL40.0 max.160.01 ～ 10-20 ～ 400.15 ～ 82 ～ 10-0.15 ～ 5.09-10.01 ～ 10.2

-

1 Preventivo 10RL40.0 max.160.01 ～ 10-20 ～ 400.15 ～ 8-1 ～ 1.990.15 ～ 5.092 ～ 10-

-

1 Preventivo 10RL40.0 max.160.01 ～ 10-20 ～ 400.15 ～ 8-1 ～ 1.990.15 ～ 5.09-1 ～ 1.99

-

1 Preventivo 10RL40.0 max.160.01 ～ 10-20 ～ 400.15 ～ 8-1 ～ 1.990.15 ～ 5.09-10.01 ～ 10.2

-

1 Preventivo 10RL40.0 max.160.01 ～ 10-20 ～ 400.15 ～ 8-10.01 ～ 10.20.15 ～ 5.092 ～ 10-

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. Avanti >>
 

Informazioni di base

Shape Straight Inside shape Regular Scrap retention Yes
Machining to prevent scrap clogging No Material SKD11 Equivalent Shank diameter D tolerance n5

Configura

Ripristina

183Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • L dimension classification

    • L40.0 max.
    • L 40.1 or more

    Ripristina

  • D (Shank diameter)(mm)

    • 6
    • 8
    • 10
    • 13
    • 16
    • 20
    • 25
    • 32
    • 38
    • 45
    • 50
    • 56

    Ripristina

  • C (Clearance)(mm)

     [0.01-10/0.005mmpezzi]

    Ripristina

  • L (L dimension)(mm)

     [30-100/0.1mmpezzi]

    Ripristina

  • LC (Full length alteration)(mm)

     [20-40/0.1mmpezzi]

    Ripristina

  • MT(Workpiece material thickness)(mm)

     [0.15-8/0.01mmpezzi]

    Ripristina

  • P (Tip dimension)(mm)

     [1-45/0.01mmpezzi]

    Ripristina

  • PC (Tip dimension alteration)(mm)

     [1-45.2/0.01mmpezzi]

    Ripristina

  • R (Tip corner R)(mm)

     [0.15-22.5/0.01mmpezzi]

    Ripristina

  • W (Tip dimension)(mm)

     [1-45/0.01mmpezzi]

    Ripristina

  • WC (Tip dimension alteration)(mm)

     [1-45.2/0.01mmpezzi]

    Ripristina

  • Tipo

    • SRS-MSD
    • SRS-MSDS
    • SRS-SDD
    • SRS-SDDS
    • SRS-SDE
    • SRS-SDES
    • SRS-SDG
    • SRS-SDGS
    • SRS-SDR
    • SRS-SDRS

    Ripristina

  • Tip shape

    • A
    • D
    • R
    • E
    • G

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.