MAG Material / Solid Wire for Soft Steel to 550 MPa Grade Steel SE-A50 (SE-A50-1.2-20)
Dettagli del prodotto:
Codice articolo del costruttore: SE-A50-1.2-20
Marca: KOBE STEEL
Prezzo: 157.51 €
Tempi di consegna: 8 giorni
Dati Tecnici:
Wire Diameter: 1.2 mm
Current range, lower: 80～300 A
Current range, vertical position, elevating, upper: 50～180/50～180
Chemical Composition of Deposited Metal C: - %
Chemical Composition of Deposited Metal Si: - %
Codice componente
Qui sono indicati i codici componente
correlati al prodotto ricercato
SE-A50-1.2-20
Codice componente
|
|---|
| SE-A50-1.2-20 |
| Codice componente |
Prezzo unitario standard
| Quantità minima d'ordine | Sconto volumi elevati | Wire Diameter (mm) | Current range, lower (A) | Current range, vertical position, elevating, upper | Chemical Composition of Deposited Metal C (%) | Chemical Composition of Deposited Metal Si (%) | Chemical Composition of Deposited Metal Mn (%) | Chemical Composition of Deposited Metal P (%) | Chemical Composition of Deposited Metal S (%) | Mechanical Properties of Weld Metal Proof Stress MPa | Mechanical Properties of Weld Metal Proof Stress, Tensile Strength MPa | Mechanical Properties of Weld Metal Proof Stress, Elongation (%) | Mechanical Properties of Weld Metal Proof Stress, Absorption Energy (J) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
157.51 € | 1 | 8 giorni | 1.2 | 80～300 | 50～180/50～180 | - | - | - | - | - | - | - | - | - |
Loading...
Informazioni di base
| Product Type | Filo per saldatura | JIS Standard | Z3313 YGW16 | AWS Standard | A5.18 ER70S-G Applicable |
|---|---|---|---|---|---|
| Compatible Material Type | For Mixed Gas and Low Current Use | Amount Of Content | 1 Box (20 kg) | Mass(g) | 20000 |
| Application and Usage Characteristic | Butt-jointing, fillet welding, and lap welding of automobiles, railcars, appliances, general machinery, etc. This is SE wire (without copper plating). It has excellent arc stability in the low to mid current region, and it's suitable for thin to medium plate welding for all welding positions. A beautiful bead is achieved with little spatter, fumes, or slag, and it's also suitable for pulse welding. There are no problems with copper plating scraps, and tip fusion is reduced, so the work capacity when using robots can be improved. | Main Points of Work | We recommend replacing the liner, etc., after using plated wire over long periods. | Authorized by the Classification Society of Japan | NK |
Configura
Proprietà di base
-
Tipo
- SE-A50
-
Wire Diameter(mm)
-
Current range, lower(A)
-
Current range, vertical position, elevating, upper
Filtrare per giorni di spedizione standard
-
- Tutti gli articoli
- 8 giorni o meno
Attributi opzionali
- Specifiche e dimensioni di alcuni componenti potrebbero non essere illustrate in modo esauriente. Per i dettagli esatti, consultare i cataloghi dei produttori .
Supporto tecnico
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.