GANTER Magneti, rotondi
| Giorni spedizione |
|
|---|
?* Informazioni su tempi di consegna e prezzi
-
Retaining magnets with threaded stud
GANTER
Retaining magnets GN 50.3 are a shielded magnetic system.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 2.76 € Consegna da ： 3 giorni *Prezzo unitario in configurazione base
-
Retaining magnets with bore
GANTER
Retaining magnets GN 50.4 are a shielded magnetic system.
To ensure that the magnetic properties (adhesive forces) are not impaired, the fixing screws must be made of non-magnetic material (magnetic not conductive).- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 2.40 € Consegna da ： 4 giorni *Prezzo unitario in configurazione base
-
Retaining magnets, with bore, Stainless Steel
GANTER
Stainless Steel-Retaining magnets GN 50.45 are a shielded magnetic system.
Owing to the lower magnetic conductivity of the stainless steel housing, the adhesive forces are lower than in steel.
To ensure that the magnetic properties (adhesive forces) are not impaired, the fixing screws must be made of non-magnetic material.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 2.94 € Consegna da ： 4 giorni *Prezzo unitario in configurazione base
-
- In Offerta
Raw magnets
GANTER
Raw magnets GN 55.2 are unshielded disc-shaped magnets.
Owing to their vast range of different magnet materials and sizes, they are suitable for virtually universal use. They are mostly attached by gluing.
When used without air gap, individual raw magnets always have lower adhesive forces than a magnet system in which shielding and magnetic return enormously intensify the force acting at the adhesion surface. Depending on the air gap between magnet and mating component, individual raw magnets - unlike magnet systems - can have substantially higher adhesive forces.
In the event that no suitable retaining magnets / magnet systems are available, raw magnets may be used in combination with appropriate holding constructions to build up highly specific magnet systems.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 1.08 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Raw magnets
GANTER
Raw magnets GN 55.3 are unshielded rod-shaped magnets.
Owing to their vast range of different sizes, they are suitable for virtually universal use. They are mostly attached by pressing in or gluing.
When used without air gap, individual raw magnets always have lower adhesive forces than a magnet system in which shielding and magnetic return enormously intensify the force acting at the adhesion surface. Depending on the air gap between magnet and mating component, individual raw magnets - unlike magnet systems - can have substantially higher adhesive forces.
In the event that no suitable retaining magnets / magnet systems are available, raw magnets may be used in combination with appropriate holding constructions to build up highly specific magnet systems.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 1.40 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
Retaining magnets with female thread
GANTER
Retaining magnets GN 50.2 are a shielded magnetic system.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 2.16 € Consegna da ： 4 giorni *Prezzo unitario in configurazione base
-
- In Offerta
Retaining magnets with female thread, Steel
GANTER
Retaining magnets GN 50.5 are a shielded magnetic system. For diameter d1 ≥ 50 the adhesive surface is lagged with a plastic cover.
To ensure that the magnetic properties (adhesive forces) are not impaired, the fixing screws must be made of non-magnetic material.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 13.70 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Retaining magnets, smooth finish
GANTER
Retaining magnets GN 52.1 are a shielded magnetic system.
Attachment options include pressing in, shrinking in or gluing in.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 4.30 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
- In Offerta
Retaining magnets, smooth finish, Brass
GANTER
Retaining magnets GN 54.1 are a shielded magnetic system.
The configuration of magnetic and iron poles is known as sandwich magnet system. These retaining magnets deliver ultimate holding power, also with smaller workpieces.
Attachment options include pressing in or gluing in.
* k1 is the maximum dimension by which the retaining magnet can be shortened without losing its properties.
** Mounting these retaining magnets directly in steel components will create a magnetic shortcircuit which reduces the retaining power by as much as 15%. To avoid this effect, the spacings k2 between brass jacket and steel component should be observed. These spacings should also be maintained if the retaining magnet is shortened.- Sconto volumi elevati
- Dati CAD disponibili in formato 2D / 3D
A partire da∗ ： 4.62 € Prezzo speciale Consegna da ： Stesso giorno *Prezzo unitario in configurazione base
-
A partire da∗ ： 5.32 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
A partire da∗ ： 6.08 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
-
A partire da∗ ： 2.60 € Consegna da ： 7 giorni *Prezzo unitario in configurazione base
| Marchio |
|---|
| Serie prodotto |
| CAD |
| A partire da∗ |
| Consegna da ： |
| Profilo |
| Forza di attrazione (gamma selezionabile)(N) |
| Forza di attrazione (valore configurabile)(N) |
| Magnete (materiale) |
| Diametro esterno(Ø) |
| Diametro interno(Ø) |
|
|
|
|
|
|
|
|
|
|
|
| |
| Marchio | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER |
| Serie prodotto | ||||||||||||
| CAD |
|
|
|
|
|
|
|
|
| |||
| A partire da∗ | 2.76 € *Prezzo unitario in configurazione base Sconto volumi elevati | 2.40 € *Prezzo unitario in configurazione base Sconto volumi elevati | 2.94 € *Prezzo unitario in configurazione base Sconto volumi elevati | 1.08 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 1.40 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 2.16 € *Prezzo unitario in configurazione base Sconto volumi elevati | 13.70 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 4.30 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 4.62 € Prezzo speciale *Prezzo unitario in configurazione base In OffertaSconto volumi elevati | 5.32 € *Prezzo unitario in configurazione base Sconto volumi elevati | 6.08 € *Prezzo unitario in configurazione base Sconto volumi elevati | 2.60 € *Prezzo unitario in configurazione base Sconto volumi elevati |
| Consegna da ： | 3 giorni | 4 giorni | 4 giorni | Stesso giorno | Stesso giorno | 4 giorni | Stesso giorno | Stesso giorno | Stesso giorno | 7 giorni | 7 giorni | 7 giorni |
| Profilo | - | - | - | - | - | - | - | - | - | - | - | - |
| Forza di attrazione (gamma selezionabile)(N) | - | - | - | - | - | - | - | - | - | - | - | - |
| Forza di attrazione (valore configurabile)(N) | - | - | - | - | - | - | - | - | - | - | - | - |
| Magnete (materiale) | Magnete in neodimio / Magnete in ferrite | Magnete in ferrite | Magneti in samario-cobalto / Magnete in ferrite | Magnete in neodimio / Magneti in samario-cobalto | Magnete in Alnico | Magnete in neodimio / Magneti in samario-cobalto / Magnete in ferrite | Magnete in neodimio | Magnete in neodimio / Magnete in Alnico | Magnete in neodimio / Magneti in samario-cobalto | - | - | - |
| Diametro esterno(Ø) | 10 ～ 63 | 16 | 20 ～ 40 | 4 ～ 24 | 3 ～ 34 | 8 ～ 125 | 32 ～ 75 | 4 ～ 63 | 6 ～ 32 | - | - | - |
| Diametro interno(Ø) | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Seleziona per:
Stock
-
- Stock Items Included
Limitare la ricerca specificando Spec./Dim.
-
Profilo
-
Tipo rotondo -
Anello
-
-
Forza di attrazione (gamma selezionabile)(N)
- Fino a 10.0
- 10.1–20.0
- 20.1–30.0
- 30.1–40.0
- 40.1–50.0
- 50.1–60.0
- 60.1–70.0
- 70,1 - 80,0
- 80.1–90.0
- 90.1–100.0
- 100.1 o sup.
-
Forza di attrazione (valore configurabile)(N)
-
Magnete (materiale)
-
Diametro esterno(Ø)
- 1
- 1.2
- 1.4
- 1.46
- 1.5
- 1.8
- 2
- 2.2
- 2.3
- 2.5
- 3
- 3 +0/-0.2
- 3.2
- 3.5
- 3.8
- 3.9
- 4
- 4 +0/-0.2
- 4.4
- 5
- 5 +0/-0.2
- 5 ±0.1
- 5.2
- 5.5
- 5.7
- 5.9
- 6
- 6 +0/-0.2
- 6 ±0.1
- 6.35
- 6.5
- 6.6
- 7
- 8
- 8 +0/-0.2
- 8 ±0.1
- 8.2
- 8.5
- 9
- 9.4
- 9.5
- 9.6
- 10
- 10 +0/-0.2
- 10 ±0.1
- 10.5
- 11
- 12
- 12 +0/-0.2
- 12 ±0.1
- 12.5
- 12.6
- 13
- 13.2
- 13.5
- 14
- 14.2
- 15
- 15 +0/-0.2
- 15 ±0.1
- 15.5
- 16
- 17
- 17.2
- 17.5
- 17.9
- 18
- 18 ±0.1
- 19
- 19.2
- 20
- 20.5
- 21
- 21.2
- 22
- 22.5
- 23
- 23.5
- 24
- 24 ±0.1
- 25
- 26
- 28
- 29
- 30
- 31
- 31.2
- 32
- 34
- 34 +0/-0.2
- 35
- 35.5
- 35.6
- 36
- 37
- 38
- 39
- 39.2
- 40
- 42
- 45
- 46
- 47
- 48
- 50
- 59
- 60
- 63
- 70
- 75
- 76
- 80
- 90
- 100
- 110
- 125
- 134
- 156
-
Diametro interno(Ø)
Limitare la ricerca specificando il produttore
-
- MISUMI (6)
- MAGNA (13)
- GANTER (12)
- NIROKU (10)
- ECLIPSE MAGNETICS (8)
- NORELEM (4)
- KIPP (3)
- NEOMAG (3)
Limitare la ricerca specificando Tipo dati CAD
-
- 2D
- 3D
Categorie collegate a Magneti, rotondi
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.