TAKIGEN Braccetti per ante

?* Informazioni su tempi di consegna e prezzi

• 

  braccetto a torsione one-way B-492

  TAKIGEN

  Possible to stop at any position. Adjust holding power and closing speed with attached hexagonal wrench.
  
  [Features]
  · Doors can be stopped at any position.
  · During operation, torque is applied in one direction.
  · Holding force and opening / closing speed can be adjusted with the included hexagonal wrench.
  · For top opening doors, left and right dual use type.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	30.02 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  braccetto inox con fermo automatico per tettoia B-1020-B

  TAKIGEN

  [Features]
  · Use the sliding stopper mechanism to hold the door securely.
  · Automatically locks by spring, and when the stopper is released the door will close.
  · For right or left (this diagram photo shows the right).

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	21.77 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  braccetto inox multi stop per tettoie B-1570-N

  TAKIGEN

  Automatic lock by spring. Door can be closed by releasing the stopper.
  
  [Features]
  · Made of stainless steel, with excellent corrosion resistance.
  · Stop at every 45° position.
  · For right or left (this diagram photo shows the right).

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	15.27 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  braccetto inox con fermo per porte pesanti B-1450

  TAKIGEN

  The fixed angle of the door can be changed by changing the hinge position.
  
  [Features]
  · Left and right dual use type (this photo is for the right side. For left side use, set the mounting bracket in reverse before use. Secure the mounting bracket and rotate the nut).

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	42.43 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Braccetto inox a molla con fermo B-1480-S

  TAKIGEN

  [Features]
  · When opening the door, the pin will fall into the stopper hole with the movement of the spring and be held securely.
  · When the arm is pushed down, the stopper is released.
  · The B-1480 (Page 868) lock mechanism was further secured.
  · Left and right dual use type.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	44.23 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  braccetto one-touch inox per coperchi B-1460

  TAKIGEN

  Stainless steel stopper with excellent corrosion resistance. With safety function to prevent accidental closing of the lid
  
  [Features]
  · When the lid is opened, the lid is fixed by the operation of the stopper.
  · The stopper is released if the lid is lifted a little while closing.
  · Equipped with a safety device to prevent the lid accidentally closing.
  · Made of stainless steel, corrosion resistant.
  · B-1460-2 to 4 are left and right dual use types.
  · When installing, the upside and downside will be reversed. (However, model B-1460-1 has separate left and right versions. This figure shows left use).

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	31.92 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  braccetto con fermo per porte pesanti B-450

  TAKIGEN

  The fixed angle of the door can be changed by changing the hinge position.
  
  [Features]
  · Left and right dual use type (this photo is for the right side. For left side use, set the mounting bracket in reverse before use. Secure the mounting bracket and rotate the nut).

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	28.08 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  braccetto in acciaio inox B1212

  TAKIGEN

  Made of reliable stainless steel.
  
  [Features]
  · Made of stainless steel, with excellent corrosion resistance, heat resistance and low temperature resistance.
  · Simple stay ideal for fixing small hatch, etc.
  · Minimal compact design.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	4.68 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  braccetto a torsione one-way B-490

  TAKIGEN

  Smooth and quiet with resin friction. Possible to stop at any position with torque adjustment.
  
  [Features]
  · Since it uses resin friction, there is no abnormal noise and movement is smooth.
  · During operation, load is applied only in one direction.
  · It stops at any position with torque adjustment.
  · Torque change due to temperature change is small.
  · For right side use.

  • Stock

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	29.02 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Gancio per coperchi B-1040

  TAKIGEN

  Compact, so it doesn't take up much installation space. Left and right types are available.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	8.84 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Braccetto di fermo per coperchio B-60-B

  TAKIGEN

  Stainless steel stay which can be stopped at any position.
  
  [Features]
  · Existing product B-1060B-60 has changed to B-1060-BB-60-B with an improvement in stopper.
  · Stops at any position by operating the stop lever.
  · Left and right dual use type.
  · Made from corrosion resistant stainless steel (B-1060-B).

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	33.36 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Braccetto grande per porte inox B-1025

  TAKIGEN

  Large stay for doors that can be used on the left and right by attaching metal fittings
  
  [Features]
  · B-1025-2A is a different type of mounting bracket of B-1025-2.
  · B-1025-3A is a stainless steel type of B-25-3.
  · Mounting bracket is same as B-1025-2A.
  · Left-right dual use type (fig. shows the right one in use. For left use, set the mounting bracket in reverse and then use).

  • Sconto volumi elevati

  • Stock

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	18.13 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Fermo 90° inox B1891

  TAKIGEN

  Auto locking, 90° C stopper that opens with one touch. Made of stainless steel, with high corrosion resistance.

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	111.85 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  Fermo 90° inox B1893

  TAKIGEN

  Automatically locks at 90° C when opening the door. Ideal for light vehicles.
  
  [Features]
  · Automatically locks at 90° when opening the door.
  · Locking does not work in the closing direction.
  · When opening more than 90°, please open the door while pressing the lock part.
  · Ideal for light vehicles.
  · Left and right combination

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	87.68 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  Fermo 90° B-893

  TAKIGEN

  [Features]
  · Automatically locks at 90° when opening the door.
  · Locking does not work in the closing direction.
  · When opening more than 90°, please open the door while pressing the lock part.
  · Ideal for light vehicles.
  · Left and right dual use type.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	37.71 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  braccetto con fermo automatico per tettoia B-20-B

  TAKIGEN

  Hold the door securely with a sliding stopper
  
  [Features]
  · Door is held securely with a sliding stopper mechanism.
  · Automatically locks by spring, and when the stopper is released the door will close.
  · For right or left (this diagram photo shows the right).

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	15.98 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  braccetto inox B-1475

  TAKIGEN

  Excellent corrosion-resistant stay made from stainless steel that can be used for both left and right
  
  [Features]
  · Made of stainless steel and has excellent corrosion resistance.
  · Left and right dual use type.

  • Sconto volumi elevati

  • Stock

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	48.13 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  braccetto con fermo B-430

  TAKIGEN

  Right and left dual use stay with stopper.
  
  [Features]
  · Mounting compatibility with B-450-2 (B-430-2), B-450-3 (B-430-3).
  · Right and left dual use type (for left use, please change the mounting position of the stopper before use).

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	17.43 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  Braccetto di fermo inox B-1145

  TAKIGEN

  Fix door at 2 stages of angle, lock by just stepping down on the arm. Made of stainless steel with excellent corrosion resistance.
  
  [Features]
  · When opening the door, the pin will enter into the stopper hole with the movement of the spring to fix it securely.
  · When pushing the arm (PUSH part) down, the stopper is released and the door can be closed.
  · The opening angle can be changed by tightening the hexagon bolt of the L type angle.
  · Left and right dual use type.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	81.89 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• 

  Braccetto di fermo inox B-1480

  TAKIGEN

  [Features]
  · When the door is opened, the pin falls into the stopper hole due to the weight of the arm and holds it perfectly in place.
  · When the arm is lifted, the stopper is released.
  · Left and right dual use type.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	39.88 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Braccetto inox a molla B-1222

  TAKIGEN

  Stop at the specified position using the operation of the spring. Can by used for both left and right, at the location of your choice.
  
  [Features]
  · Stop at the specified position using the operation of the spring.
  · Left and right dual use type.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	35.67 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Braccetto inox a molla B-1491

  TAKIGEN

  Stop at the specified position using the operation of the spring. There is no worry of gas leakage, and the sliding part can also suppress the generation of metal powder by resin.
  
  [Features]
  · Stop at the specified position using the operation of the spring.
  · Since a spring is being used, there is no worry of gas leak.
  · There is no direction for installation.
  · Can also be used for reducing the weight of the lid.
  · Since the resin bush is used for the sliding part, it is possible to suppress the occurrence of metal powder due to abrasion.
  · Made of stainless steel, corrosion resistant.
  · Left and right dual use type.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	65.23 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Braccetto inox a molla B-1221

  TAKIGEN

  Since wire is contained in the core, it does not extend too much. Ideal for lightweight small hatch, etc. as a simple stay.
  
  [Features]
  · Made of stainless steel, with excellent corrosion resistance, heat resistance and low temperature resistance.
  · Simple stay ideal for fixing small hatch, etc.
  · Minimal compact design.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	23.22 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Braccetto inox a molla con chiusura di sicurezza B-1474

  TAKIGEN

  [Features]
  · Fully fixed type focused on safety.
  · Safety lock mechanism added to conventional stay B-1460.
  · Will not close unless the lock is released by pressing the button.
  · SUS316 type with salt tolerance specification.
  · For right and left side.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	53.64 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Morsetto da tavolo inox B-1485

  TAKIGEN

  [Features]
  · Made of stainless steel, with excellent corrosion resistance.
  · When the table is raised, it is held in place by the stopper.
  · Slide by pulling the stopper knob.
  · Stretch type with little danger of pinching your hands.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	48.57 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Morsetto da tavolo inox B-1847

  TAKIGEN

  When the table is raised it is held in place by the stopper, and it is possible to store it by pushing the stopper knob. Stainless steel with excellent erosion resistance.
  
  [Features]
  · Made of stainless steel, with excellent corrosion resistance.
  · Raise the table and hold it in place by the operation of the stopper.
  · Can be stored by pushing the stopper knob.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	15.33 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Braccetto di stallo inox B-1467

  TAKIGEN

  Made of stainless steel which is resistant to vibration and shock and has excellent corrosion resistance. When opened it is fully fixed, and it closes when the stopper is pushed.
  
  [Features]
  · Safe structure resistant to vibration shock.
  · Made of stainless steel, corrosion resistant.
  · When opened it is fully fixed, and it closes when the stopper is pushed.
  · For right or left (this diagram photo shows the right).

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	40.27 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Braccetto a scatto B-1468

  TAKIGEN

  Stainless steel with excellent corrosion resistance, vibration and shock resistant safety structure
  
  [Features]
  · Safety structure resistant to vibration shock.
  · Made of stainless steel, corrosion resistant.
  · There are 3 types with the same total length (L₂) and different stop positions (1 to 6).
  · Left and right dual use type.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	37.11 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Braccetto pivot inox B-1472-1

  TAKIGEN

  A new type of stay designed to stop at 22.5° C and open and close the door as far as 90° C
  
  [Features]
  · Multi-level stay with strength adjustment function.
  · A new type of multi-level stay designed to stop at every 22.5° and open and close the door as far as 90° C, that also prevents the door's vibration.
  · For right and left side.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	17.55 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Braccetto di fermo foot-style inox B-1482

  TAKIGEN

  [Features]
  · When you open the door the stopper locks and fixes the door in place.
  · To release the lock, step on the arm with your foot, and close the door.
  · Left and right dual use type.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	27.58 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Braccetto di fermo foot-style B482

  TAKIGEN

  [Features]
  · When you open the door the stopper locks and fixes the door in place.
  · To release the lock, step on the arm with your foot, and close the door.
  · Left and right dual use type.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	13.61 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Braccetto di fermo libero inox B-1571

  TAKIGEN

  Ratchet mechanism type with safety stopper is a safe design which holds the door in position even if it is released while moving.
  
  [Features]
  · Even if you release your hand while opening the canopy, it retains its position by the operation of the ratchet mechanism type safety stopper (PAT.PEND.).

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	90.57 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Braccetto one-touch inox B-1479

  TAKIGEN

  [Features]
  · Made of stainless steel, with excellent corrosion resistance.
  · When the lid is opened, it is fixed at any position by the operation of the stopper.
  · When closing, please extend the stay to full to release the stopper.
  · Thin type that doesn't take up space.
  · Left and right dual use type.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	36.26 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Braccetto a binario B-476

  TAKIGEN

  If the door is pulled, it is firmly fixed at the stop position. Release is easy operated by just pulling the stopper.
  
  [Features]
  · Stops at the stop position without fail.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	102.16 €
  Consegna da ：	14 giorni

  *Prezzo unitario in configurazione base

• 

  Stainless Steel Lock Opener Brace, B-1469

  TAKIGEN

  Locks with one touch. To unlock, just pull the knob. Made from stainless steel for superior corrosion resistance.
  
  [Features]
  · Made of stainless steel, with excellent corrosion resistance.
  · Locking is complete with one touch, and unlocking can be done just by pulling the knob.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	61.61 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  braccetto one-touch inox B-1223

  TAKIGEN

  The stopper engages when the window is opened. It will be unlocked if lifted a little while closing. Made of stainless steel with excellent corrosion resistance.
  
  [Features]
  · Made of stainless steel, with excellent corrosion resistance.
  · When the door is opened, the door is fixed by the operation of the stopper.
  · The stopper is released if it is lifted a little while closing.
  · For right or left (this diagram photo shows the right).

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	23.95 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  braccetto scorrevole con cinghia di rilascio B-894

  TAKIGEN

  [Features]
  · Tough on opening and closing rough doors.
  · When opening the door, it automatically locks in the first stage. Pull the belt to unlock it, and open up to the 2nd stage or close the door.
  · With Velcro to hold the belt.

  Dati CAD disponibili in formato 2D

  A partire da∗ ：	125.30 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  braccetto per porte leggere in inox B-1454

  TAKIGEN

  Stay for light doors made of stainless steel with excellent corrosion resistance
  
  [Features]
  · Made of stainless steel and has excellent corrosion resistance.
  · Left and right dual use type (this figure shows use on the left. To use on the right, set the mounting bracket in reverse).

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	18.32 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Braccetto senza fermo inox B-1470

  TAKIGEN

  Universal stay that can stop the door at any position by handle operation
  
  [Features]
  · By operating the stopper, the door can be stopped at any position.
  · Left and right dual use type.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	47.12 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Braccetto per porte pesanti in inox B-1451

  TAKIGEN

  Stay for left and right type heavyweight doors using a stop mechanism with a strong coil spring
  
  [Features]
  · Uses a stop mechanism with a strong coil spring.
  · Left and right dual use type (this photo diagram shows the right one set. For left use, set the mounting bracket in reverse and then use).

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	55.82 €
  Consegna da ：	5 giorni

  *Prezzo unitario in configurazione base

• 

  Braccetto piegato ammortizzato B-495

  TAKIGEN

  Can be used with either front lid or canopy, adjustable length foldable damper stay
  
  [Features]
  · Can be used for either front lid or canopy (damper effect can be obtained in the front lid opening direction and canopy closing direction).
  · Link B length can be adjusted (the default setting is 150 mm.
  · It can be changed to 160 mm/170 mm).
  · Opening (closing) the door when changing the length of link B without changing the mounting position.
  · The speed will change (the longer it is faster the speed will be. The opening and closing angle does not change).
  · Use two for left and right.
  · For right and left side.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	31.19 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Braccetto in inox per copertura frontale B-1458

  TAKIGEN

  Resin is used in the slide part and the stainless steel provides excellent in corrosion resistance even though the slide is very smooth
  
  [Features]
  · It is made of stainless steel and has excellent corrosion resistance.
  · The resin is used in the slide portion and the operation is very smooth.
  · Left and right dual use type.

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	13.97 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Braccetto per finestre in inox B-1452

  TAKIGEN

  Dual-purpose stay made of stainless steel, with excellent corrosion resistance.
  
  [Features]
  · Made of stainless steel, with excellent corrosion resistance.
  · Left and right dual use type (this photo is for the right side.
  · For left use, set the mounting bracket in reverse and then use).

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	59.43 €
  Consegna da ：	6 giorni

  *Prezzo unitario in configurazione base

• 

  Braccetto spesso in inox per carichi pesanti ed uso frequente B-1456

  TAKIGEN

  Robust structure suitable for super heavy doors. Unlock with wire. Made of stainless steel with excellent corrosion resistance.
  
  [Features]
  · Robust structure suitable for super heavy doors.
  · Made of stainless steel, corrosion resistant.
  · Release lock with wire (B-1456-W).
  · For right / for left

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	486.24 €
  Consegna da ：	10 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Braccetto per coperchi B-40

  TAKIGEN

  Compact and does not take up much space, so it can be used in any place.
  
  [Features]
  · Small and does not take up much installation space.
  · For right / for left (This diagram photo is for right).

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  A partire da∗ ：	4.86 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

Loading...