THK Guide lineari standard（Precisione：Grado di precisione）
Limitare la ricerca specificando Tipo di blocco
-
Standard -
Corto -
Largo -
Largo lungo -
Lungo -
Extra lungo -
Largo corto
?* Informazioni su tempi di consegna e prezzi
-
Sistemi di guida monorotaia in miniatura / tipo di guida selezionabile / dimensioni del carrello selezionabili / SRS
THK
A miniature type with a compact structure. Can be mounted in areas in space saving areas, and a part of the LM block has been formed using resin to achieve lightweight.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- Dati CAD disponibili in formato 2D / 3D
Consegna da ： 14 giorni -
Guide profilate / dimensioni del carrello selezionabili / materiale selezionabile / SHS
THK
A standard type of LM guide with ball retainer. Incurs load from four directions which allows it to be used in any position.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- Dati CAD disponibili in formato 2D / 3D
Consegna da ： 15 giorni -
Guide profilate / dimensioni del carrello selezionabili / precisione / materiale selezionabile / SSR
THK
Radial type that is strong against loads in the radial direction. More advantageous than SHS when incurring loads in the radial direction (longevity, precision, rigidity, etc.). A stainless steel type not featured with the SHS is also available.
*When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- Dati CAD disponibili in formato 2D / 3D
Consegna da ： 15 giorni -
Guide profilate / guida larga / carrello largo / materiale selezionabile / HRW
THK
A structure with a wide rail width and low center of gravity. HSR It is advantageous when there are Mc moment requirements and is thin compared with.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Compact heavy load: A high number of effective balls makes it possible to obtain high rigidity in all directions. Has a wide rail width and can adequately withstand moments with a single shaft.
There is a high rigidity in the horizontal direction and there is no need to for reinforcement such as horizontal pressing due to large secondary moments being incurred on the rail cross-section.
· The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.- Dati CAD disponibili in formato 2D / 3D
Consegna da ： 15 giorni -
Guide profilate / dimensioni del carrello selezionabili / materiale selezionabile / SR
THK
A type with a compact structure that has a low cross-section height and is resilient against loads in the radial direction. More advantageous than HSR when incurring loads in the radial direction (longevity, precision, rigidity, etc.).
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
· A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.
· This is a self-aligning type that can easily absorb error in the level precision and the degree of parallelism for the two shafts, which is capable of highly precise and smooth movements.
· The retainer part on each of the ball rows can obtain rolling motions with limited sound because of the balls being designed to smoothly circulate using the guiding part on the end plate.
· It is possible to maintain precision of long periods of time, have excellent abrasion resistance and limited differential slipping even when there is a preload or uneven loads.
· LM block, LM rail, and LM rail are all compatible with stainless steel.- Dati CAD disponibili in formato 2D / 3D
Consegna da ： 15 giorni -
Guide profilate / guida larga / carrello largo / materiale selezionabile / SHW
THK
A structure with a wide rail width and low center of gravity. SHS It is advantageous when there are Mc moment requirements and is thin compared with.
[Features]
· A highly rigid LM guide that is capable of superior high speeds, maintenance-free over long periods of time, and having low noise due to the adoption of a ball retainer.
· The SHW, which has a structure with a width LM rail width and a low center of gravity, is ideal for use in locations where there are space limitations, and when there are MC moment rigidity requirements.
· Each of the rail rows has been arranged in an array at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and can be used for a wide range of application.
· The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.
· The ball retainers eliminate the mutual friction between the balls and holds the lubricant oil (agent) to achieve superior low-dust performance.- Dati CAD disponibili in formato 2D / 3D
Consegna da ： 15 giorni -
Guide profilate / dimensioni del carrello selezionabili / materiale selezionabile / HSR
THK
A standard full-ball type. Incurs load from four directions which allows it to be used in any position. A series with the most abundance in variations in size and shape, etc.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.- Dati CAD disponibili in formato 2D / 3D
Consegna da ： 14 giorni -
Guida LM con sistema a ricircolo di sfere con fermo, corsa limitata, EPF
THK
A limited stroke type. Smooth movement due to there being no ball circulation. Also has a high rigidity compared with conventional products from a structural standpoint. It is particularly advantageous when there are Mc moment requirements.- Dati CAD disponibili in formato 2D / 3D
Consegna da ： 25 giorni -
Guida LM con sistema a ricircolo di sfere completo, radiale, SR-M1
THK
High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.- Dati CAD disponibili in formato 2D
Consegna da ： 40 giorni -
Guide profilate in miniatura / tipo di guida selezionabile / dimensioni del carrello selezionabili / SRS-G
THK
A full-ball type with not ball retainer on the SRS type.
[Features]
· The LM guide with ball retainer SRS type has a structure that includes two rolling sides on a compact body, which allows the load to be incurred from all sides, and can be used with a single shaft at locations that have limited space requirements and locations that use moment.
· The adoption of the ball retainer has eliminated mutual friction between the balls, which provides excellent high speed, low noise, good sound quality, long life, and being maintenance-free for long periods of time.
· The ball retainer eliminates the mutual friction between the balls, which improves the grease holdability and reduces the raised dust amount.
· The LM block and LM rail both use stainless steel that are highly rust-proof.
· The rail cross-section height is kept low, and it has a compact structure with a single left and right ball row, which allows it be mounted in space saving areas.
· This is a lightweight type where a part (around the ball escape hole, etc.) of the LM block has been insert formed using resin materials.- Dati CAD disponibili in formato 2D / 3D
Consegna da ： 20 giorni -
Guida LM con sistema a ricircolo di sfere completo, elevata resistenza alle alte temperature in conformità con gli standard internazionali, HSR-M1
THK
High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used from any position.
· The LM guide for use in high temperatures can be used in even higher temperatures of up to 150°C as a result of using a unique technology for the materials, heat treatment, and lubricant.
· Can now be used in temperatures of up to 150°C by using stainless steel end rails and end rails that utilize rubber materials for use in high temperatures.
· A dimensional consistency treatment has been applied to achieve excellent dimensional consistency after applying heat or cooling (may thermally expand under high temperatures).
· The LM block, LM rail, and balls all use stainless steel with excellent corrosion resistance, which is ideal for use in clean rooms.
· Uses a grease for use in high temperatures with limited rolling resistance fluctuations resulting from grease even when the temperature fluctuates from a normal temperature to a high temperature.- Dati CAD disponibili in formato 2D
Consegna da ： 55 giorni
| Marchio |
|---|
| Serie prodotto |
| CAD |
| A partire da∗ |
| Consegna da ： |
| Kit/Articolo singolo |
| Tipo di blocco |
| Tipo di binario |
| Larghezza del binario(mm) |
| Altezza di montaggio H(mm) |
| N. di blocchi |
| Materiale |
| Lunghezza del binario L(mm) |
| Precarico |
| Precisione |
| Numero modello nominale |
| Disposizione sfere |
| Fermo |
| Passo del foro di montaggio per blocco (direzione larghezza)(mm) |
| Passo del foro di montaggio per blocco (direzione lunghezza)(mm) |
| Diametro del foro di montaggio per blocco |
| Passo del foro di montaggio del binario(mm) |
| Diametro del foro di montaggio del binario |
|
|
|
|
|
|
|
|
|
|
| |
| Marchio | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK |
| Serie prodotto | Guide profilate / dimensioni del carrello selezionabili / materiale selezionabile / SHS | Guide profilate / dimensioni del carrello selezionabili / precisione / materiale selezionabile / SSR | Guide profilate / guida larga / carrello largo / materiale selezionabile / HRW | Guide profilate / dimensioni del carrello selezionabili / materiale selezionabile / SR | Guide profilate / guida larga / carrello largo / materiale selezionabile / SHW | Guide profilate / dimensioni del carrello selezionabili / materiale selezionabile / HSR | Guida LM con sistema a ricircolo di sfere con fermo, corsa limitata, EPF | Guida LM con sistema a ricircolo di sfere completo, radiale, SR-M1 | |||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
| A partire da∗ | - | - | - | - | - | - | - | - | - | - | - |
| Consegna da ： | 14 giorni | 15 giorni | 15 giorni | 15 giorni | 15 giorni | 15 giorni | 14 giorni | 25 giorni | 40 giorni | 20 giorni | 55 giorni |
| Kit/Articolo singolo | Kit | Kit | Kit | Kit | Kit | Kit | Kit | Kit | Kit | Kit | Kit |
| Tipo di blocco | Standard / Largo / Lungo | Standard / Largo | Standard / Largo | Largo | Standard / Largo / Largo corto | Largo | Standard / Largo | Standard | Standard / Largo / Largo corto | Standard / Largo | Standard / Largo |
| Tipo di binario | Standard / Largo | Standard | Standard | Largo | Standard | Largo | Standard | Standard | Standard | Standard / Largo | Standard |
| Larghezza del binario(mm) | 9 ～ 42 | 15 ～ 63 | 15 ～ 34 | 18 ～ 120 | 15 ～ 70 | 18 ～ 90 | 15 ～ 63 | 7 ～ 15 | 15 ～ 34 | 9 ～ 42 | 15 ～ 28 |
| Altezza di montaggio H(mm) | 6.5 ～ 25 | 24 ～ 90 | 24 ～ 48 | 12 ～ 60 | 24 ～ 85 | 12 ～ 50 | 28 ～ 90 | 8 ～ 16 | 24 ～ 48 | 10 ～ 25 | 24 ～ 45 |
| N. di blocchi | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 |
| Materiale | Acciaio inox | Acciaio al carbonio | Acciaio al carbonio / Acciaio inox | Acciaio al carbonio / Acciaio inox | Acciaio al carbonio / Acciaio inox | Acciaio al carbonio / Acciaio inox | Acciaio al carbonio / Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox | Acciaio inox |
| Lunghezza del binario L(mm) | 30 ～ 2000 | 71 ～ 3000 | 47 ～ 3000 | 38 ～ 3000 | 47 ～ 3000 | 38 ～ 3000 | 64 ～ 3000 | 33 ～ 110 | 47 ～ 1500 | 32 ～ 2000 | 67 ～ 1500 |
| Precarico | Standard / Precarico leggero | Standard / Precarico leggero / Precarico medio | Standard / Precarico leggero | Standard / Precarico leggero / Precarico medio | Standard / Precarico leggero / Precarico medio | Standard / Precarico leggero / Precarico medio | Standard / Precarico leggero / Precarico medio | - | Standard / Precarico leggero / Precarico medio | Standard / Precarico leggero | Standard / Precarico leggero / Precarico medio |
| Precisione | Grado di precisione | Grado di precisione | Grado di precisione | Grado di precisione | Grado di precisione | Grado di precisione | Grado di precisione | Grado di precisione | Grado di precisione | Grado di precisione | Grado di precisione |
| Numero modello nominale | 5W ～ 25 | 15 ～ 65 | 15 ～ 35 | 12 ～ 60 | 15 ～ 70 | 12 ～ 50 | 15 ～ 65 | 7 ～ 15 | 15 ～ 35 | 9W ～ 25 | 15 ～ 30 |
| Disposizione sfere | Standard | 4 ricircoli ad arco circolare | 4 ricircoli ad arco circolare | 4 ricircoli ad arco circolare | 4 ricircoli ad arco circolare | 4 ricircoli ad arco circolare | 4 ricircoli ad arco circolare | 4 ricircoli ad arco circolare | 4 ricircoli ad arco circolare | Standard | 4 ricircoli ad arco circolare |
| Fermo | Disponibile | Disponibile | Disponibile | N/A | N/A | Disponibile | N/A | Disponibile | N/A | N/A | N/A |
| Passo del foro di montaggio per blocco (direzione larghezza)(mm) | 15 ～ 45 | 26 ～ 142 | 26 ～ 60 | 21 ～ 180 | 26 ～ 90 | 21 ～ 144 | 11.5 ～ 142 | 12 ～ 25 | 26 ～ 82 | 15 ～ 45 | 11.5 ～ 72 |
| Passo del foro di montaggio per blocco (direzione lunghezza)(mm) | 10 ～ 35 | 26 ～ 120 | 26 ～ 50 | 12 ～ 80 | 26 ～ 90 | 15 ～ 80 | 18 ～ 120 | 13 ～ 25 | 26 ～ 50 | 10 ～ 35 | 18 ～ 60 |
| Diametro del foro di montaggio per blocco | 3 ～ 6 | 4 ～ 16 | 4 ～ 8 | 3 ～ 10.5 | 4 ～ 16 | 2.5 ～ 10 | 4 ～ 16 | 2 ～ 3 | 4 ～ 9 | 3 ～ 6 | 4 ～ 10 |
| Passo del foro di montaggio del binario(mm) | 20 ～ 60 | 60 ～ 150 | 60 ～ 80 | 40 ～ 105 | 60 ～ 150 | 40 ～ 80 | 60 ～ 150 | 15 ～ 40 | 60 ～ 80 | 20 ～ 60 | 60 ～ 80 |
| Diametro del foro di montaggio del binario | 3 ～ 7 | 4.5 ～ 18 | 4.5 ～ 9 | 4.5 ～ 11 | 3.5 ～ 18 | 4.5 ～ 9 | 4.5 ～ 18 | 2.4 ～ 3.5 | 3.5 ～ 9 | 3.5 ～ 7 | 4.5 ～ 9 |
Loading...
Seleziona per:
Limitare la ricerca specificando Spec./Dim.
-
Kit/Articolo singolo
- Kit
- Solo blocco
- Solo binario
-
Tipo di binario
-
Standard -
Largo
-
-
Larghezza del binario(mm)
-
Altezza di montaggio H(mm)
-
N. di blocchi
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
-
Materiale
- Acciaio al carbonio
- Acciaio inox
- Alluminio
in caso di prodotti in kit, carrello e rotaia sono realizzati negli stessi materiali
-
Lunghezza del binario L(mm)
- 25
- 30
- 35
- 40
- 45
- 50
- 55
- 60
- 70
- 74
- 75
- 80
- 85
- 87
- 95
- 96
- 100
- 109
- 110
- 115
- 120
- 125
- 130
- 135
- 140
- 145
- 150
- 155
- 160
- 165
- 170
- 175
- 190
- 195
- 200
- 205
- 215
- 220
- 230
- 235
- 240
- 245
- 250
- 255
- 260
- 265
- 270
- 275
- 280
- 290
- 295
- 300
- 310
- 315
- 320
- 335
- 340
- 345
- 350
- 355
- 360
- 370
- 375
- 390
- 395
- 400
- 415
- 420
- 430
- 435
- 440
- 445
- 455
- 460
- 470
- 475
- 495
- 500
- 510
- 515
- 520
- 535
- 545
- 550
- 555
- 560
- 570
- 575
- 580
- 590
- 595
- 600
- 615
- 620
- 630
- 635
- 640
- 645
- 670
- 680
- 695
- 700
- 710
- 720
- 745
- 750
- 760
- 770
- 790
- 795
- 800
- 820
- 830
- 840
- 845
- 870
- 880
- 895
- 910
- 920
- 940
- 945
- 950
- 970
- 990
- 1000
- 1040
- 1060
- 1080
- 1120
- 1160
- 1180
- 1200
- 1240
- 1300
- 1320
- 1360
- 1400
- 1420
- 1440
- 1480
- 1520
- 1540
- 1560
- 1600
- 1640
- 1660
- 1720
- 1780
- 1800
- 1840
- 1880
- 1900
- 1960
- 2000
- 2080
- 3000
- 3120
- 3960
- 4000
[30-3000/1mmpezzi]
-
Precarico
- Standard
- Precarico leggero
- Precarico medio
- Gioco
- Precarico pesante
Si prega di verificare gli standard di precisione di ciascun produttore
-
Precisione
- Grado standard
- Grado elevato
- Grado di precisione
- Grado di precisione elevato
- Grado di precisione ultra
Si prega di verificare gli standard di precisione di ciascun produttore
-
Numero modello nominale
-
Disposizione sfere
-
Fermo
-
Passo del foro di montaggio per blocco (direzione larghezza)(mm)
-
Passo del foro di montaggio per blocco (direzione lunghezza)(mm)
-
Diametro del foro di montaggio per blocco
-
Passo del foro di montaggio del binario(mm)
-
Diametro del foro di montaggio del binario
Limitare la ricerca specificando il produttore
-
- MISUMI (4)
- THK (11)
- BOSCH REXROTH (4)
- SBC (1)
- OZAK (0)
- IKO (0)
- SKF (0)
- GANTER (0)
- SCHNEEBERGER (0)
- INA (0)
- NORELEM (0)
Limitare la ricerca specificando Tipo dati CAD
-
- 2D
- 3D
Limitare la ricerca specificando Tempi di consegna
-
- Tutti gli articoli
- 4 giorni o meno
- 5 giorni o meno
- 6 giorni o meno
- 7 giorni o meno
- 8 giorni o meno
- 9 giorni o meno
- 10 giorni o meno
- 11 giorni o meno
- 12 giorni o meno
- 13 giorni o meno
Categorie collegate a Guide lineari standard
Metodo di pagamento
Produzione on demand
Certificati
Copyright © MISUMI Corporation All Rights Reserved.