Golfari, viti ad alette per cerniere

?* Informazioni su tempi di consegna e prezzi

• 

  Lifting eye bolts, Steel

  GANTER

  These lifting eye bolts correspond to standard sheet DIN 580.
  The following guidelines of lifting eye bolts DIN 580 the have to be observed in addition to the load values given in the above table.
  The eye bolt must be of fully screwd in to achieve a perfect contact between the two mating faces.
  Both threads must be of a equal length and the base material of equal strength to that of the bolt.
  Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
  The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	2.62 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Lifting eye bolts, Stainless Steel A2

  GANTER

  The following guidelines for Stainless Steel-Lifting eye bolts DIN 580 have to be observed in addition to the load values given in the above table.
  The eye bolt must be of fully screwed in to achieve a perfect contact between the two mating faces.
  Both threads must be of a equal length and the base material of equal strength to that of the bolt.
  Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
  The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	5.68 €
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Lifting eye bolts (rotating), Steel

  GANTER

  The lifting eye bolts GN 581are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in lifting eye bolts DIN 580).
  Lifting eye bolts GN 581 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).
  The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.
  Lifting eye bolts GN 581 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
  The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.
  The hexagon socket bolt cannot be removed from the ring.
  Type B is suitable for assembly without the need to use tools: inserting the spanner in the hexagon socket of the bolt allows the bolt to be turned in and out by hand.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	84.46 €
  	Prezzo speciale
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Stainless Steel-Swing bolts with long threaded bolt

  GANTER

  Stainless Steel-Swing bolts GN 1524 offer a longer threaded bolt contrary to DIN 444.
  For stocking purposes cylinder head shoulder bolts GN 732 can be used for the sizes M8, M10 and M12.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	14.26 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Bullone di inclinazione simili a DIN 444, Acciaio inox

  MAEDLER

  Materiale: Acciaio inox 1.4305 (AISI 303).
  Realizzato con precisione, Rullato.
  La Lunghezza della filettatura l ₂ è più grande di quella DIN.
  La versione in Acciaio inox delle stesse Dimensione non fa parte della norma DIN.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	17.60 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Lifting eye nuts, Steel

  GANTER

  The following guidelines of the lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table.
  The eye nut must be of fully screwd in to achieve a perfect contact between the two mating faces.
  Both threads must be of a equal length and the base material of equal strength to that of the nut.
  Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
  The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	2.58 €
  	Prezzo speciale
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• 

  Lifting eye nuts (rotating), Steel

  GANTER

  Lifting eye nuts GN 583 are mounted in rotating bearings, allowing the direction of the force action to be adjusted and preventing inadvertent loosening or overturning (as potentially possible in lifting eye nuts DIN 582).
  Lifting eye nuts GN 583 offer a high load carrying capacity and they are tested to meet safety standards (safety factor 4).
  The rated load carrying capacity listed in the above table is clearly marked on the ring. It applies to the most unfavourable load application of the load types listed opposite.
  Lifting eye nuts GN 583 comply with Mechanical Engineering Directive 2006 / 42 / EG and are BG tested.
  The integrated RFID transponder clearly marks and identifies the sling and lifting gear, e.g. during the prescribed regular inspection.
  The hexagon socket nut cannot be removed from the ring.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	101.30 €
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Lifting eye nuts, Stainless Steel A2

  GANTER

  The following guidelines of the Stainless Steel-Lifting eye nuts DIN 582 have to be observed in addition to the load values given in the above table.
  The eye nut must be of fully screwd in to achieve a perfect contact between the two mating faces.
  Both threads must be of a equal length and the base material of equal strength to that of the nut.
  Operating instructions with more details and specifications are included with every delivery (see also www.ganter-griff.com/service).
  The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	5.96 €
  	Prezzo speciale
  Consegna da ：	7 giorni

  *Prezzo unitario in configurazione base

• • In Offerta

  

  Swing bolts with long threaded bolt

  GANTER

  GN 1524 swing bolts offer a longer threaded bolt contrary to DIN 444.
  For stocking purposes cylinder head shoulder bolts GN 732 can be used for the sizes M8, M10 and M12.

  • Sconto volumi elevati

  Dati CAD disponibili in formato 2D / 3D

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	8.46 €
  	Prezzo speciale
  Consegna da ：	Stesso giorno

  *Prezzo unitario in configurazione base

• 

  Bullone di inclinazione simili a DIN 444, Acciaio

  MAEDLER

  Materiale: Acciaio, finitura Brunito, Resistenza alla trazione 5.8.
  Realizzato con precisione, Rullato.
  Contrariamente alla norma, la versione in Acciaio Brunito presenta una maggiore Resistenza alla trazione (5,8 anziché 4,6/5,6) e la Lunghezza della filettatura l ₂ è maggiore.

  • Sconto volumi elevati

  Seleziona per confrontare

  Configura ora
  A partire da∗ ：	8.88 €
  Consegna da ：	4 giorni

  *Prezzo unitario in configurazione base

Loading...