• Marchi
  • Società
  • Contatti
IT
Type Code Seach | *NOT READY*
#CODE
Suggerimento keywords
Suggerimenti codice prodotto
Prodotti fuori produzione

Perni con nucleo sagomato / cilindrici / HSS / l 0,01 mm / forma della faccia conica selezionabile (Codici componente - Download CAD)

Perni con nucleo sagomato / cilindrici / HSS / l 0,01 mm / forma della faccia conica selezionabile

Fare clic sull'immagine per ingrandirla.

Cliccare sull´immagine per ingrandirla.

MISUMI

MISUMI

Scheda tecnica

Codice componente

Qui sono indicati i codici componente
correlati al prodotto ricercato

Codice componente:  

    L'anteprima 3D non è disponibile perché non è ancora stato definito il codice componente.

  • Per poter visualizzare l'anteprima 3D è necessario definire il codice componente.
Loading...

È richiesto il plug-in per l'anteprima 3D

Download CAD

Numero di dati da visualizzare
30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Avanti >>
Codice componente
CPM-1A1-[6.5-100/0.01]-F[12-99.4/0.01]-V[0.5-0.99/0.005]
CPM-1A1-[6.5-100/0.01]-F[12-99.4/0.01]-VC[0.4-0.49/0.005]
CPM-1A1-[6.5-100/0.01]-FC[5-11.99/0.01]-V[0.5-0.99/0.005]
CPM-1A1-[6.5-100/0.01]-FC[5-11.99/0.01]-VC[0.4-0.49/0.005]
CPM-1A1.5-[6.5-100/0.01]-F[12-99.5/0.01]-V[0.5-1.49/0.005]
CPM-1A1.5-[6.5-100/0.01]-F[12-99.5/0.01]-VC[0.4-0.49/0.005]
CPM-1A1.5-[6.5-100/0.01]-FC[5-11.99/0.01]-V[0.5-1.49/0.005]
CPM-1A1.5-[6.5-100/0.01]-FC[5-11.99/0.01]-VC[0.4-0.49/0.005]
CPM-1A2-[6.5-100/0.01]-F[12-99.5/0.01]-V[0.5-1.99/0.005]
CPM-1A2-[6.5-100/0.01]-F[12-99.5/0.01]-VC[0.5-0.695/0.005]
CPM-1A2-[6.5-100/0.01]-FC[5-11.99/0.01]-V[0.5-1.99/0.005]
CPM-1A2-[6.5-100/0.01]-FC[5-11.99/0.01]-VC[0.5-0.695/0.005]
CPM-1A2.5-[6.5-100/0.01]-F[12-99.5/0.01]-V[0.5-2.49/0.005]
CPM-1A2.5-[6.5-100/0.01]-F[12-99.5/0.01]-VC[0.5-0.69/0.01]
CPM-1A2.5-[6.5-100/0.01]-FC[5-11.99/0.01]-V[0.5-2.49/0.005]
CPM-1A2.5-[6.5-100/0.01]-FC[5-11.99/0.01]-VC[0.5-0.69/0.01]
CPM-1A3-[6.5-100/0.01]-F[12-99.5/0.01]-V[0.7-2.99/0.005]
CPM-1A3-[6.5-100/0.01]-F[12-99.5/0.01]-VC[0.7-0.99/0.005]
CPM-1A3-[6.5-100/0.01]-FC[5-11.99/0.01]-V[0.7-2.99/0.005]
CPM-1A3-[6.5-100/0.01]-FC[5-11.99/0.01]-VC[0.7-0.99/0.005]
CPM-1A3.5-[6.5-100/0.01]-F[12-99.5/0.01]-V[1-3.49/0.01]
CPM-1A3.5-[6.5-100/0.01]-F[12-99.5/0.01]-VC[0.7-0.99/0.005]
CPM-1A3.5-[6.5-100/0.01]-FC[5-11.99/0.01]-V[1-3.49/0.01]
CPM-1A3.5-[6.5-100/0.01]-FC[5-11.99/0.01]-VC[0.7-0.99/0.005]
CPM-1A4-[6.5-100/0.01]-F[12-99.5/0.01]-V[1-3.99/0.005]
CPM-1A4-[6.5-100/0.01]-F[12-99.5/0.01]-VC[0.7-0.99/0.005]
CPM-1A4-[6.5-100/0.01]-FC[5-11.99/0.01]-V[1-3.99/0.005]
CPM-1A4-[6.5-100/0.01]-FC[5-11.99/0.01]-VC[0.7-0.99/0.005]
CPM-1A4.5-[6.5-100/0.01]-F[12-99.5/0.01]-V[1-4.49/0.005]
CPM-1A4.5-[6.5-100/0.01]-F[12-99.5/0.01]-VC[1-1.49/0.005]
CPM-1A4.5-[6.5-100/0.01]-FC[5-11.99/0.01]-V[1-4.49/0.005]
CPM-1A4.5-[6.5-100/0.01]-FC[5-11.99/0.01]-VC[1-1.49/0.005]
CPM-1A5-[6.5-100/0.01]-F[12-99.5/0.01]-V[1-4.99/0.005]
CPM-1A5-[6.5-100/0.01]-F[12-99.5/0.01]-VC[1-1.49/0.005]
CPM-1A5-[6.5-100/0.01]-FC[5-11.99/0.01]-V[1-4.99/0.005]
CPM-1A5-[6.5-100/0.01]-FC[5-11.99/0.01]-VC[1-1.49/0.005]
CPM-1A5.5-[6.5-100/0.01]-F[12-99.5/0.01]-V[1.5-5.49/0.005]
CPM-1A5.5-[6.5-100/0.01]-F[12-99.5/0.01]-VC[1-1.49/0.005]
CPM-1A5.5-[6.5-100/0.01]-FC[5-11.99/0.01]-V[1.5-5.49/0.005]
CPM-1A5.5-[6.5-100/0.01]-FC[5-11.99/0.01]-VC[1-1.49/0.005]
CPM-1A6-[6.5-100/0.01]-F[12-99.5/0.01]-V[2-5.99/0.005]
CPM-1A6-[6.5-100/0.01]-F[12-99.5/0.01]-VC[1.5-1.99/0.005]
CPM-1A6-[6.5-100/0.01]-FC[5-11.99/0.01]-V[2-5.99/0.005]
CPM-1A6-[6.5-100/0.01]-FC[5-11.99/0.01]-VC[1.5-1.99/0.005]
CPM-1A6.5-[6.5-100/0.01]-F[12-99.5/0.01]-V[2-6.49/0.005]
CPM-1A6.5-[6.5-100/0.01]-F[12-99.5/0.01]-VC[1.5-1.99/0.005]
CPM-1A6.5-[6.5-100/0.01]-FC[5-11.99/0.01]-V[2-6.49/0.005]
CPM-1A6.5-[6.5-100/0.01]-FC[5-11.99/0.01]-VC[1.5-1.99/0.005]
CPM-1A7-[6.5-100/0.01]-F[12-99.5/0.01]-V[2-6.99/0.005]
CPM-1A7-[6.5-100/0.01]-F[12-99.5/0.01]-VC[1.5-1.99/0.005]
CPM-1A7-[6.5-100/0.01]-FC[5-11.99/0.01]-V[2-6.99/0.005]
CPM-1A7-[6.5-100/0.01]-FC[5-11.99/0.01]-VC[1.5-1.99/0.005]
CPM-1A8-[6.5-100/0.01]-F[12-99.5/0.01]-V[2-7.99/0.005]
CPM-1A8-[6.5-100/0.01]-F[12-99.5/0.01]-VC[1.5-1.99/0.005]
CPM-1A8-[6.5-100/0.01]-FC[5-11.99/0.01]-V[2-7.99/0.005]
CPM-1A8-[6.5-100/0.01]-FC[5-11.99/0.01]-VC[1.5-1.99/0.005]
CPM-1A10-[6.5-100/0.01]-F[12-99.5/0.01]-V[2-9.99/0.005]
CPM-1A10-[6.5-100/0.01]-F[12-99.5/0.01]-VC[1.5-1.99/0.005]
CPM-1A10-[6.5-100/0.01]-FC[5-11.99/0.01]-V[2-9.99/0.005]
CPM-1A10-[6.5-100/0.01]-FC[5-11.99/0.01]-VC[1.5-1.99/0.005]
Codice componente
Prezzo unitario standard
Quantità minima d'ordineSconto volumi elevati
Giorni
spedizione standard
?
RoHSL dimension tolerance D/P (Shaft diameter)
(mm) 		Step (Step shape of the first step) Shape (Tip shape) A (Step shape diameter)
(mm) 		C (Step type taper width)
(mm) 		CVC (Designation of C dimension in increments of 0.01mm)
(mm) 		F (Bearing bore length)
(mm) 		FC (Makes F dimension shorter than F min)
(mm) 		G (Tip C chamfering width)
(mm) 		K (Tip angle)
(°) 		L (L dimension)
(mm) 		Q (Tip R chamfering)
(mm) 		R (Step type R)
(mm) 		S (Tip tapered width)
(mm) 		V (Tip diameter)
(mm) 		VC (V dimension alteration, smaller than V min)
(mm)

-

1 Preventivo 10+0.01/011ANo processing---12 ～ 99.4---6.5 ～ 100---0.5 ～ 0.99-

-

1 Preventivo 10+0.01/011ANo processing---12 ～ 99.4---6.5 ～ 100----0.4 ～ 0.49

-

1 Preventivo 10+0.01/011ANo processing----5 ～ 11.99--6.5 ～ 100---0.5 ～ 0.99-

-

1 Preventivo 10+0.01/011ANo processing----5 ～ 11.99--6.5 ～ 100----0.4 ～ 0.49

-

1 Preventivo 10+0.01/01.51ANo processing---12 ～ 99.5---6.5 ～ 100---0.5 ～ 1.49-

-

1 Preventivo 10+0.01/01.51ANo processing---12 ～ 99.5---6.5 ～ 100----0.4 ～ 0.49

-

1 Preventivo 10+0.01/01.51ANo processing----5 ～ 11.99--6.5 ～ 100---0.5 ～ 1.49-

-

1 Preventivo 10+0.01/01.51ANo processing----5 ～ 11.99--6.5 ～ 100----0.4 ～ 0.49

-

1 Preventivo 10+0.01/021ANo processing---12 ～ 99.5---6.5 ～ 100---0.5 ～ 1.99-

-

1 Preventivo 10+0.01/021ANo processing---12 ～ 99.5---6.5 ～ 100----0.5 ～ 0.695

-

1 Preventivo 10+0.01/021ANo processing----5 ～ 11.99--6.5 ～ 100---0.5 ～ 1.99-

-

1 Preventivo 10+0.01/021ANo processing----5 ～ 11.99--6.5 ～ 100----0.5 ～ 0.695

-

1 Preventivo 10+0.01/02.51ANo processing---12 ～ 99.5---6.5 ～ 100---0.5 ～ 2.49-

-

1 Preventivo 10+0.01/02.51ANo processing---12 ～ 99.5---6.5 ～ 100----0.5 ～ 0.69

-

1 Preventivo 10+0.01/02.51ANo processing----5 ～ 11.99--6.5 ～ 100---0.5 ～ 2.49-

-

1 Preventivo 10+0.01/02.51ANo processing----5 ～ 11.99--6.5 ～ 100----0.5 ～ 0.69

-

1 Preventivo 10+0.01/031ANo processing---12 ～ 99.5---6.5 ～ 100---0.7 ～ 2.99-

-

1 Preventivo 10+0.01/031ANo processing---12 ～ 99.5---6.5 ～ 100----0.7 ～ 0.99

-

1 Preventivo 10+0.01/031ANo processing----5 ～ 11.99--6.5 ～ 100---0.7 ～ 2.99-

-

1 Preventivo 10+0.01/031ANo processing----5 ～ 11.99--6.5 ～ 100----0.7 ～ 0.99

-

1 Preventivo 10+0.01/03.51ANo processing---12 ～ 99.5---6.5 ～ 100---1 ～ 3.49-

-

1 Preventivo 10+0.01/03.51ANo processing---12 ～ 99.5---6.5 ～ 100----0.7 ～ 0.99

-

1 Preventivo 10+0.01/03.51ANo processing----5 ～ 11.99--6.5 ～ 100---1 ～ 3.49-

-

1 Preventivo 10+0.01/03.51ANo processing----5 ～ 11.99--6.5 ～ 100----0.7 ～ 0.99

-

1 Preventivo 10+0.01/041ANo processing---12 ～ 99.5---6.5 ～ 100---1 ～ 3.99-

-

1 Preventivo 10+0.01/041ANo processing---12 ～ 99.5---6.5 ～ 100----0.7 ～ 0.99

-

1 Preventivo 10+0.01/041ANo processing----5 ～ 11.99--6.5 ～ 100---1 ～ 3.99-

-

1 Preventivo 10+0.01/041ANo processing----5 ～ 11.99--6.5 ～ 100----0.7 ～ 0.99

-

1 Preventivo 10+0.01/04.51ANo processing---12 ～ 99.5---6.5 ～ 100---1 ～ 4.49-

-

1 Preventivo 10+0.01/04.51ANo processing---12 ～ 99.5---6.5 ～ 100----1 ～ 1.49

-

1 Preventivo 10+0.01/04.51ANo processing----5 ～ 11.99--6.5 ～ 100---1 ～ 4.49-

-

1 Preventivo 10+0.01/04.51ANo processing----5 ～ 11.99--6.5 ～ 100----1 ～ 1.49

-

1 Preventivo 10+0.01/051ANo processing---12 ～ 99.5---6.5 ～ 100---1 ～ 4.99-

-

1 Preventivo 10+0.01/051ANo processing---12 ～ 99.5---6.5 ～ 100----1 ～ 1.49

-

1 Preventivo 10+0.01/051ANo processing----5 ～ 11.99--6.5 ～ 100---1 ～ 4.99-

-

1 Preventivo 10+0.01/051ANo processing----5 ～ 11.99--6.5 ～ 100----1 ～ 1.49

-

1 Preventivo 10+0.01/05.51ANo processing---12 ～ 99.5---6.5 ～ 100---1.5 ～ 5.49-

-

1 Preventivo 10+0.01/05.51ANo processing---12 ～ 99.5---6.5 ～ 100----1 ～ 1.49

-

1 Preventivo 10+0.01/05.51ANo processing----5 ～ 11.99--6.5 ～ 100---1.5 ～ 5.49-

-

1 Preventivo 10+0.01/05.51ANo processing----5 ～ 11.99--6.5 ～ 100----1 ～ 1.49

-

1 Preventivo 10+0.01/061ANo processing---12 ～ 99.5---6.5 ～ 100---2 ～ 5.99-

-

1 Preventivo 10+0.01/061ANo processing---12 ～ 99.5---6.5 ～ 100----1.5 ～ 1.99

-

1 Preventivo 10+0.01/061ANo processing----5 ～ 11.99--6.5 ～ 100---2 ～ 5.99-

-

1 Preventivo 10+0.01/061ANo processing----5 ～ 11.99--6.5 ～ 100----1.5 ～ 1.99

-

1 Preventivo 10+0.01/06.51ANo processing---12 ～ 99.5---6.5 ～ 100---2 ～ 6.49-

-

1 Preventivo 10+0.01/06.51ANo processing---12 ～ 99.5---6.5 ～ 100----1.5 ～ 1.99

-

1 Preventivo 10+0.01/06.51ANo processing----5 ～ 11.99--6.5 ～ 100---2 ～ 6.49-

-

1 Preventivo 10+0.01/06.51ANo processing----5 ～ 11.99--6.5 ～ 100----1.5 ～ 1.99

-

1 Preventivo 10+0.01/071ANo processing---12 ～ 99.5---6.5 ～ 100---2 ～ 6.99-

-

1 Preventivo 10+0.01/071ANo processing---12 ～ 99.5---6.5 ～ 100----1.5 ～ 1.99

-

1 Preventivo 10+0.01/071ANo processing----5 ～ 11.99--6.5 ～ 100---2 ～ 6.99-

-

1 Preventivo 10+0.01/071ANo processing----5 ～ 11.99--6.5 ～ 100----1.5 ～ 1.99

-

1 Preventivo 10+0.01/081ANo processing---12 ～ 99.5---6.5 ～ 100---2 ～ 7.99-

-

1 Preventivo 10+0.01/081ANo processing---12 ～ 99.5---6.5 ～ 100----1.5 ～ 1.99

-

1 Preventivo 10+0.01/081ANo processing----5 ～ 11.99--6.5 ～ 100---2 ～ 7.99-

-

1 Preventivo 10+0.01/081ANo processing----5 ～ 11.99--6.5 ～ 100----1.5 ～ 1.99

-

1 Preventivo 10+0.01/0101ANo processing---12 ～ 99.5---6.5 ～ 100---2 ～ 9.99-

-

1 Preventivo 10+0.01/0101ANo processing---12 ～ 99.5---6.5 ～ 100----1.5 ～ 1.99

-

1 Preventivo 10+0.01/0101ANo processing----5 ～ 11.99--6.5 ～ 100---2 ～ 9.99-

-

1 Preventivo 10+0.01/0101ANo processing----5 ～ 11.99--6.5 ～ 100----1.5 ～ 1.99

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. Avanti >>
 

Informazioni di base

Shape type One-step Material SKH51 Shaft diameter tolerance 0/-0.003
Tip gradient tolerance ±0.005 Surface treatment No Head thickness 4mm(T4)
Step (Step shape of the second step) No second step

Configura

Ripristina

2,315Codice componente applicabile suggerito

Visualizza codici componente

Alcune specifiche non sono state ancora indicate.
Codice componente identificato.

Proprietà di base

  • L dimension tolerance

    • +0.01/0
    • 0/-0.05

    Ripristina

  • D/P (Shaft diameter)(mm)

    • 1
    • 1.5
    • 2
    • 2.5
    • 3
    • 3.5
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 6.5
    • 7
    • 8
    • 10
    • 13

    Ripristina

  • Step (Step shape of the first step)

    • 1A
    • 1B
    • 1C
    • 1D
    • 1E

    Ripristina

  • Shape (Tip shape)

    • No processing
    • C
    • G
    • T
    • R
    • B

    Ripristina

  • A (Step shape diameter)(mm)

     [0.5-12.99/0.005mmpezzi]

    Ripristina

  • C (Step type taper width)(mm)

    • 1.1

     [0.1-4/0.1mmpezzi]

    Ripristina

  • CVC (Designation of C dimension in increments of 0.01mm)(mm)

     [0.1-1/0.01mmpezzi]

    Ripristina

  • F (Bearing bore length)(mm)

     [12-99.5/0.01mmpezzi]

    Ripristina

  • FC (Makes F dimension shorter than F min)(mm)

     [5-11.99/0.01mmpezzi]

    Ripristina

  • G (Tip C chamfering width)(mm)

     [0.1-6.4/0.05mmpezzi]

    Ripristina

  • K (Tip angle)(°)

     [21-60/0.1°pezzi][10-60/1°pezzi]

    Ripristina

  • L (L dimension)(mm)

     [6.5-100/0.01mmpezzi]

    Ripristina

  • Q (Tip R chamfering)(mm)

     [0.2-6.4/0.1mmpezzi]

    Ripristina

  • R (Step type R)(mm)

     [0.2-5.5/0.1mmpezzi]

    Ripristina

  • S (Tip tapered width)(mm)

     [0.1-50/0.05mmpezzi]

    Ripristina

  • V (Tip diameter)(mm)

     [0.5-3.49/0.01mmpezzi][0.5-12.99/0.005mmpezzi]

    Ripristina

  • VC (V dimension alteration, smaller than V min)(mm)

     [0.5-0.69/0.01mmpezzi][0.4-0.49/0.005mmpezzi][0.5-0.99/0.005mmpezzi][1-1.49/0.005mmpezzi][1.5-1.99/0.005mmpezzi][2-2.49/0.005mmpezzi]

    Ripristina

  • Tipo

    • CPM-1A
    • CPM-1AB
    • CPM-1AC
    • CPM-1AG
    • CPM-1AR
    • CPM-1AT
    • CPM-1B
    • CPM-1BB
    • CPM-1BC
    • CPM-1BG
    • CPM-1BR
    • CPM-1BT
    • CPM-1C
    • CPM-1CB
    • CPM-1CC
    • CPM-1CG
    • CPM-1CR
    • CPM-1CT
    • CPM-1D
    • CPM-1DB
    • CPM-1DC
    • CPM-1DG
    • CPM-1DR
    • CPM-1DT
    • CPM-1E
    • CPM-1EB
    • CPM-1EC
    • CPM-1EG
    • CPM-1ER
    • CPM-1ET

    Ripristina

  • Filtrare per tipo dati CAD

    • 2D
    • 3D

    Ripristina

Attributi opzionali

Recensioni dei clienti

Siamo in cerca di stelle!
Comunicaci cosa ne pensi

Supporto tecnico

Questioni tecniche

Metodo di pagamento

  • Fattura
  • Pagamento anticipato
  • PayPal

Produzione on demand

Cambia di vista

Certificati

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI nel mondo

Social Media

Informazioni legali

Copyright © MISUMI Corporation All Rights Reserved.